Leakomatic Pro1 User Manual page 15

Volume test M1 (VTt, VTm)
Volume Test settings for a pulse water meter connected to the AUX1 input.
VTt
VTt Status
VTt Time Period
VTt Volume
VTt Alarm Delay
VTt Valve Management
VTm
VTtm Status
VTm Time Period
VTm Volume
VTm Alarm Delay
VTm Valve
Management
Volume test M2 (VTt, VTm)
Volume Test settings for a pulse water meter connected to the AUX2 input. See description
above for "Volume Test M1".
Specifies whether the hourly volume test will be
activated or not. If "Turned off" is selected, the
VTt alarm times below do not have any effect.
The length of the analysis period for the hourly
volume calculation.
Specifies the size of the volume that is permitted
to be used during the set VTt Time Period.
When a Volume Test Warning occurs, an extra
time is set here, during which the warning is
allowed to continue before the valve is closed.
Specifies if the valve will close on alarm.
Specifies whether the minute volume test will be
activated or not. If "Turned off" is selected, the
VTm alarm times below do not have any effect.
The length of the analysis period for the minute
volume calculation.
Specifies the size of the volume that is permitted
to be used during the set VTm Time Period.
When a Volume Test Warning occurs, an extra
time is set here, during which the warning is
allowed to continue before the valve is closed.
Specifies if the valve will close on alarm.
Enabled/
Disabled
0–24 hours
(24)
1–9999999
liters
0–24 hours
(1)
None/
Close
Enabled/
Disabled
1–60 min
(5)
1–999999
liters
0–120 min
(5)
None/
Close
15