Table of Contents
Advertisement
40
www.zanussi.com
Remove the three transit bolts.
8.
9. Pull out the plastic spacers.
10. Put the plastic caps in the holes (X3).
You can find these caps in the user
manual bag.
3rd
2nd
1st
A
14.2 Positioning
It is important that your machine stands
firm and leveled on the floor to ensure
correct operation. The appliance must
not be installed behind a lockable door, a
sliding door or a door with a hinge on the
opposite side to avoid restricting the
machine door.
Use a spirit level on the top and side of
the machine to check the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
machine is leveled.
Advertisement
Chapters
Table of Contents
