Remote Control - Clarion VRX766VD Owner's Manual & Installation Manual

6. REMOTE CONTROL

Remote control unit
[ DISC SEL ]
[
[ SET UP ]
[ RPT ]
[ SUB TITLE ]
Inserting the Batteries
1. Slide the rear cover in the direction of the
arrow, and remove it.
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries
bundled with the remote control unit in the
directions shown in the figure, then close the
rear cover.
Note:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
[ BAND ]
[ SRC ]
[ 0-9 ]
],[ ]
[ RTN ]
[ ENT ]
[ SCN ]
[ AUDIO ]
Signal transmitter Signal transmitter
Operating range: 30˚ in all directions Operating range: 30˚ in all directions
[ MUTE ]
[ VOLUME ]
[ P.TIME ]
[ SEARCH MODE ]
[ MENU ]
[ TOP MENU ]
[ ],[ ]
[ 2-ZONE ]
[ RDM ]
[ SLOW ]
[ ANGLE ]
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear side
[ ISR ]
[ PBC ]
Rear cover
13