Remote Control - Clarion NX501E Owner's Manual & Installation Manual

5. REMOTE CONTROL

[MUTE]
[ /
[0-9]
[SRCH]
[BACK]
[ , , ,
[TITLE]
[ ], [
[ZOOM]
[AUDIO]
Replacing the batteries
1. Press the retention tab and pull out the battery tray
and remove the old battery.
2. Insert the new CR2025 battery and slide the battery
tray back in the remote control the same direction
that you removed it.
Please ensure the tray is inserted in the correct
direction.
]
]
]
Signal transmitter
Operating rang : 30°in all directions
[OPEN]
[POWER / SRC]
[VOLUME]
[NAVI / AV]
[BAND]
[SET]
[MENU]
[PIC]
[ENT]
[TA]
[RPT]
[ROOT]
[
[SUB.T]
[ANGLE]
Note:
Using batteries improperly can cause them to explode.
Take note of the following points:
• When replacing batteries, replace both batteries with
new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
WARNING
Lithium (CR) battery contain
Perchlorate
Dispose of discharged batteries properly.
], [ ]
NX501E/NZ501E 13