Emptying The Detergent Draw, Cleaning The Detergent Drawer And Its Housing; Drain Pump Is Blocked - Siemens WN44A2X0GC Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Cleaning and maintenance
en
Emptying the detergent draw,
cleaning the detergent drawer
and its housing
If the appliance contains detergent or
fabric softener residues:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
To remove the insert: Push the insert
2.
upwards from below with your finger.
Clean the detergent dispenser tray
3.
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
44
Fit the insert and lock it in place
4.
(push the cylinder onto the guide
pin).
Push in the detergent drawer.
5.
Leave the detergent drawer open
Note:
so that any residual water can
evaporate.

Drain pump is blocked

Turn the water tap off to prevent
Note:
more water from flowing in and to
ensure that it is drained via the pump.
:
Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down first.
Turn the programme selector to
1.
Û (Off). Pull out the mains plug.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wn44a2xsgc

Table of Contents