Additional Programme Settings37; S (Prewash); Ý (Easy Iron) - Siemens WD4HU541EU Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Ø (Iron dry): Normal, single-layered
laundry that still needs to be damp
after drying and is suitable for
ironing or hanging up.
Notes
To ensure an even drying result, sort
the laundry before drying.
~ "Preparing laundry for drying"
on page 26
Do not exceed the maximum loads
for drying.
~ "Overview of programmes"
on page 29
Maximum spin speed for washing
programmes with drying will be
selected automatically to obtain a
suitable drying result.
\
Additional programme
settings
You can find possible additional
N ote:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
Additional programme settings
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
( Speed
Washing/drying in a shorter time while
achieving a washing/drying result that is
consistent with the normal performance.
Touch ( Speed to activate or
deactivate this additional programme
setting.
With the additional ( Speed
Note:
option activated, the maximum washing
load will be reduced, and extra cooling
water will be needed for the drying
process.

s (Prewash)

Prewash for heavily soiled laundry.
Touch s (Prewash) to activate or
deactivate it.
Put the detergent into dispenser I
Note:
and II.
Ý (Easy iron)
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch Ý (Easy iron) and activate or
deactivate it.
If Ý (Easy iron) has been
Note:
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
en
37

Advertisement

Table of Contents
loading

Table of Contents