Replacing The Filter - Philips AC3021 User Manual

8
Touch the button to switch on the appliance�
9
Touch and hold the
10
Wash your hands thoroughly after cleaning the filter�

Replacing the filter

Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure that the air
purification filter is in optimal condition when the air purifier is operating� When the filter
need to be replaced, the filter replacement alert
If the filter is not replaced in time, the air purifier will stop operating and automatically lock to
protect the air quality in the room� Replace the filter as soon as possible�
Replacing the filter
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before replacing the
filters�
Filter alert light status
The filter replacement alert
lights up (fig )
x
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig
3
Pull the filter from the appliance (fig
4
Remove all packaging materials of the new filter (fig
5
Put the new filter into the appliance (fig
6
Reattach the back cover (fig
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the
10
Wash your hands thoroughly after replacing the filter�
Note: Do not smell the filter as it has collected pollutants from the air�
EN
12
button for 3 seconds to reset the filter cleaning time�
Action
Replace the NanoProtect filter Series 3 (FY3430/30)
)�
v
)�
f
)�
g
button for 3 seconds to reset the filter lifetime counter�
lights up red�
)�
c
)�
e