Technical Parameters This machine can heat transfer colorful Model: MP999 pictures and characters of sublimation and dissolve printing ink onto textiles Voltage: 110v/220V which are made of cotton, ax, chemical 1800w/2200w/28000w Wattage: ber, nylon, ceramics and glasses and so 0°F--399°F Temperature: on.
Page 3
Operation Setup A. Plug in and turn on the power switch. The power indicator will light up . B. SET the time & temperature-controller: Panel Indications: 1. During normal operation, Temperature, Time, Counter, °C (or F is selected), SEC and counter are always displayed; 2.
Operation Proceedures 1. Temperature Setting: press SET key, temp ashes, press ^ key to increase the set temperature, and press “v” key to reduce the set temperature; 2. Press the set key again, the time ashes, press the ^ key to increase the setting time, and press the “v”...
5. The temperature is out of control: Set 356ºF,but the actual temperature is above 392ºF. A). Relay may need to be changed. B). Or the digital controller may need to be changed. If you need further assistance, please kindly contact Pro World for support: 800-678-8289...
Page 7
Warranty Disclaimers Pro World shall not be liable for loss of use of TransPro equipment or other inciden- tal or consequential costs, expenses, or damages incurred by the original purchaser or any other user.
Page 8
Pro World Inc. 961 Bethel Ave. Pennsauken, NJ 08110 Toll Free 800-678-8289 Outside U.S. 856-406-1020 Fax 856-406-1025...