Summary of Contents for Pro World TransPro Plus MP356
Page 1
D T F H E A T P R E S S HEAT PRESS USER’S GUIDE www.ProWorldInc.com Pro World Inc. 401 Taylor Ave. Gordonsville, VA 22942 Toll Free 800-678-8289 Outside U.S. 856-406-1020...
Page 2
Technical Paramaters Control Panel Guide Model: MP356( Transpro Plus DTF Heat Press ) Heater Size: 13.8’’ 16.5’’(350 420mm) Lower Platen Size 13.8’’ 16.5’’(350 420mm) Pressure Display: Auto Open: Power(120volt) 1500W/12.5Amps Power(240volt) 1500W/6.5Amps Max.221 /430 Temperature Range: 25minutes Heating Up Time(180 )...
Page 3
OPPERATION INSTRUCTIONS Machine View 1. Ramspin: Switch Manual/Auto Open Manual Open Auto Open Mode Mode www.proworldinc.com...
Page 4
2. Connecting the System 3.2 Keep Pressing SET one by one until it shows as below: 2.1 Connect the power cord into a properly grounded electrical outlet with a su cient amperage rating. 2.2 VOLTAGE: 120 Volt – The MP356 TransPro Plus DTF Heat Press requires a full 15 amp grounded circuit for 120 volt operation.
Page 5
5. Presetting Functions 6. Changing The Presets This control panel can allow us have 5 If the default presetting is not satis ed di erent groups of temperature and time with you ,then you can follow the presetting to bring more convenient for following instructions to re-set as what users.
Page 6
8. Pressure Adjustments 7.2 Adjust To Real Temperature Pressing SET one by one until it shows as The Pressure Adjustment Knob is located below to get into calibration interface. in the center of the heat platen. Adjust the pressure by turning the knob clockwise to increase pressure and counter clockwise to decrease pressure.
Page 7
Warranty Disclaimers Pro World shall not be liable for loss of use of TransPro equipment or other inciden- tal or consequential costs, expenses, or damages incurred by the original purchaser or any other user.
Page 8
Pro World Inc. 401 Taylor Ave. Gordonsville, VA 22942 Toll Free 800-678-8289 Outside U.S. 856-406-1020...
Need help?
Do you have a question about the TransPro Plus MP356 and is the answer not in the manual?
Questions and answers