Changing Scanning Parameters; Selecting Trigger Mode - Nordic ID MORPHIC User Manual

CHAPTER FIVE – DATA CAPTURE
To enable Viewfinder:
1. In the NID Scanner applet, select
a 'Misc' property page
2. On the Misc page, tap on a
'Video preview' checkbox to
check it.
3. Tap on the 'OK' button. The
viewfinder is enabled.

CHANGING SCANNING PARAMETERS

Selecting
three operational modes.
Trigger Mode
You may try all of them
to find a suitable one for
yourself.
Before you begin:
1. Open Control Panel
2. Open 'NID Scanner' control panel
applet
To select trigger mode:
1. In the NID Scanner applet, select a 'Misc' property page
2. On the Misc page, select a 'Trigger Mode' of your choice within the list.
3. Tap on the 'OK' button. The trigger mode is in operation.
42
The scan key has