Related Manuals for Nordic ID SAMPO S2
Summary of Contents for Nordic ID SAMPO S2
- Page 1 2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 NORDIC ID SAMPO S2 NORDIC ID SAMPO S2 ONE- SERIES USER GUIDE...
- Page 2 Version 1.0 TABLE OF CONTENTS GETTING STARTED ................................4 1.1. GENERAL ................................4 1.2. DIFFERENCES BETWEEN NORDIC ID SAMPO S2 AND NORDIC ID SAMPO S2 ONE-SERIES ..4 1.3. AVAILABLE VARIANTS ............................ 5 1.4. AVAILABLE ACCESSORIES ..........................5 1.5. PACKAGE CONTENT ............................5 1.6.
- Page 3 2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 WEB MANAGEMENT INTERFACE ..........................18 REGIONAL SETTINGS ..............................19 SERVICE AND SUPPORT..............................19 WARRANTY ..................................19 RELATED DOCUMENTS AND CONTENT ......................... 19 ABOUT NORDIC ID ................................. 20 VERSION HISTORY ................................20 APPENDICES ..................................
-
Page 4: Getting Started
GETTING STARTED 1.1. GENERAL Nordic ID Sampo S2 is a versatile fixed UHF RFID reader with SW controllable low and normal gain functionalities. This reader offers both EU and US frequencies in one reader and multiple connectivity options. This versatile reader is suitable for multiple use cases e.g. in POS and various gate options. It’s integrated computer enables installation and operation of 3rd party applications. -
Page 5: Available Variants
Nordic ID Sampo S2 / UHF RFID (USB / LAN 10 /100&PoE) NPG00004 Nordic ID Sampo S2 / UHF RFID (USB / LAN 10 /100&PoE / WLAN) Nordic ID Sampo S2/ UHF RFID (USB / LAN 10 /100&PoE / WLAN / WWAN NPG00005 (3G)) -
Page 6: Features And Connectors Overview
Safety and regulations guide NOTE! Power supply not included 1.6. FEATURES AND CONNECTORS OVERVIEW WLAN and WWAN (3G) variants of Nordic ID Sampo S2 UHF RFID reader include internal WLAN and WWAN antennas. Picture 1 Connector panel of Nordic ID Sampo S2... -
Page 7: Mounting
Version 1.0 1.7. MOUNTING Nordic ID Sampo S2 and Nordic ID Sampo S2 UHF RFID readers can be mounted using assembly holes of the reader. Dimensional drawing about the assembly holes can be find from Figure 1. Nordic ID Sampo S2 One-series UHF RFID reader can be mounted also with M5 threaded screws to any VESA 75 and VESA 100 mounting equipment (sold separately). -
Page 8: Powering The Reader
Version 1.0 1.8. POWERING THE READER Nordic ID Sampo S2 can be powered via DC power supply (sold separately) or ethernet port if the network supports power over Ethernet (PoE) feature or PoE injector is being used. Regardless of what powering method is used, the data communication can be handled via USB connection or if IP connectivity is required then via WWAN, WLAN or ethernet. - Page 9 2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 • 12VDC / 24 VDC supply 12VDC if the reader is powered via PoE and 24VDC if the reader is powered via external power supply. The multipurpose GPIO connector can be accessed via DE15 connector located on rear panel of the reader.
-
Page 10: Antenna Ports
NOTE! If 5V or 12V / 24V output is used, connect pins 4 and 9 together. ANTENNA PORTS Nordic ID Sampo S2 includes 3pcs SMA female antenna connectors for connecting external antennas to the reader. Impedance of antenna ports is 50Ω and maximum radiated output power is •... -
Page 11: Usb 2.0 Host With Type A Connector
SLOT FOR MINI SIM CARD (OPTIONAL) The WWAN variant of Nordic ID Sampo S2 includes a slot for mini SIM card. Mini SIM card is to be inserted in the slot in a right orientation to be functional. The correct insertion orientation of mini SIM card can be seen from the Picture 2. -
Page 12: User Interface
Version 1.0 Picture 2 Insertion orientation of mini SIM card 1.10. USER INTERFACE User interface of Nordic ID Sampo S2 consists of 4 LED indicators and a reset button on the back of the reader. LED INDICATORS Nordic ID Sampo S2 has four programmable LEDs for user indications. Location of the LEDs can be seen from Picture 3. -
Page 13: Power Led
2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 Picture 3 Location of LEDs 1.10.1.1. POWER LED By default, Power LED indicates if the power is supplied to the device via DC power supply or PoE. 1.10.1.2. RFID ON LED RFID On LED indicates whether the RFID reading is ON or OFF. -
Page 14: Communication Led
LED blinking: The reader has IP address, but the host application is not connected LED on: The reader has IP address and the host application is connected. RESET BUTTON Reset button of Nordic ID Sampo S2 contains the following functionalities: • Rebooting the reader... -
Page 15: Buzzer
BUZZER Nordic ID Sampo S2 includes a buzzer for sound indications. The buzzer can be controlled via SW. CAPACITIVE SENSOR Nordic ID Sampo S2 includes a capacitive sensor for triggering reading. The capacitive sensor can be controlled via SW. -
Page 16: Rf Profiles
Sometimes there can be challenging areas in the reading environment that needs extra coverage. For this purpose, there are 3 SMA female connectors (AUX1, AUX2 & AUX3) in the Nordic ID Sampo S2 reader. The external antennas can be enabled/disabled via SW and be used to improve reading performance and accuracy if needed. - Page 17 2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 onboard computer and UHF RFID module and adjusts operation points based on the temperature information. Onboard computer starts mitigation scheme (for example clock frequencies of CPUs are dropped) when temperature of the onboard computer reaches 85°C.
-
Page 18: Software
This makes sure that only valid content from the zip-file can be installed. The tool in question is called Nordic ID Application Signing Tool. The tool can be used to sign pre-built zip-files, as also to create new zip-files from scratch. -
Page 19: Regional Settings
UHF RFID readers to comply local regional requirements. Nordic ID has created a set of regional settings in order to fulfil local regulations. Nordic ID is required to ensure that compliance of Nordic ID products will remain after production. Solution for this is that products including UHF RFID functionality are set and locked in production based on customer order e.g. -
Page 20: About Nordic Id
Nordic ID GitHub account for developers (https://github.com/NordicID) ABOUT NORDIC ID Nordic ID is at the center of today’s real-time item tracking and reliable RFID technology. We help organizations fight the damaging effects of item loss, facilitate streamlined business procedures, and stay ahead of the competition. -
Page 21: Appendices
2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 APPENDICES 10.1. EXAMPLE SCHEMATICS OF GPIO INTERFACE Nordic ID Group | Salo IoT Center | Joensuunkatu 7 | FI-24100 Salo |Finland 21 / 22 Office +358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com... - Page 22 2018-01-19 Nordic ID Sampo S2 User Guide Version 1.0 Nordic ID Group | Salo IoT Center | Joensuunkatu 7 | FI-24100 Salo |Finland 22 / 22 Office +358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com...