Installing Micro Sd Card; Before You Begin; To Open Micro Sd-Card Holder; To Put Micro Sd-Card In Position - Nordic ID MORPHIC User Manual

CHAPTER THREE – BASIC FUNCTIONALITY

INSTALLING MICRO SD CARD

Before you You can find the holder of micro SD card in the battery
compartment.
begin
1. If the wall charger is plugged in, unplug your unit first
2. If the battery is installed, open the battery cover and remove the
battery
To Open Micro
SD-card Holder
direction of the device bottom to
unlock the cover
2. Open the cover by lifting it up with
your thumb on its edge on the
side of the battery compartment
To Put Micro SD-
card in Position
on the card and on the holder fit
together on the side of the wall of
the compartment
To Lock Micro
SD-card into
position
5. Press the cover with the card gently against the holder while you lock
the cover into position by sliding it in the direction of the battery
fastening
33
1. Slide the
cover of the
SD-card
holder in the
3. Put the card
in position
so that the
indentations
4. Press the
SD-card near the hinged side of the holder's
cover with the index finger of one hand to keep
the card in position while you start closing the
cover with the index finger of other hand