How To Obtain Service Assistance - Rheem GHE 119-500 Use & Care Manual

1. Should you have any questions about your new
water heater, or if it requires adjustment, repair,
or routine maintenance, it is suggested that you
first contact your installer, plumbing contractor
or previously agreed upon service agency. In the
event that the firm has moved, or is unavailable,
refer to the telephone directory commercial list-
ings or local utility for qualified service assis-
tance.
2. Should your problem not be solved to your com-
plete satisfaction, you should then contact the
Manufacturer's National Service Department at
one of the following address:
In The U.S.A.:
Rheem Sales Co., Inc.
1241 Carwood Court
Montgomery, Alabama 36117
Phone: 1-800-432-8373.
In CANADA:
Rheem Canada, Ltd. / Ltée
125 Edgeware Road, Unit 1
Brampton, ON L6Y 0P5
Phone: 1-800-268-6966.
The following Gaskets are required for Normal Maintenance for all Models:
All other Parts can be ordered by providing the following information:

How to Obtain Service Assistance

SP20772 Tank Handhole Sealplate Gasket
1. Description of Part(s), such as:
Gas Valve
Igniter
Burner
Switch/Sensor
Blower Assembly
Anode Rod
Or other parts as required (see replacement parts section).
2. Quantity of each part required.
3. Complete model number and name of the water heater.
4. Serial Number of water heater.
5. Specify Type of Gas.
6. Address Parts Orders to your distributor or dealer.
When contacting the manufacturer, the following
information should be made available:
a. Model and serial numbers of the water heater as
shown on the rating plate attached to the jacket
of the heater.
b. Address where water heater is located and can
be seen.
c. Name and address of installer and any service
agency who performed service on the water
heater.
d. Date of original installation and dates any ser-
vice work was performed.
e. Details of the problem as you can best describe
them.
f. List of people, with dates, who have been con-
tacted regarding your problem.
40