Table of Contents
Advertisement
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
Turn off the power at the switchboard
before beginning the installation.
Post a warning sign near the switchboard
to ensure that the power will not be
applied while the equipment is being
installed.
Serious injury or death can result if the
power is not turned off, or is applied while
the equipment is being installed.
CAUTION
Ground the equipment.
Ungrounded equipment can
give off or receive electro-
magnetic interference or
cause electrical shock.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage.
The voltage rating appears on the label
at the rear of the equipment.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Display unit
Terminal unit
ii
Standard
Steering
compass
compass
1.3 m
1.0 m
1.7 m
1.3 m
Advertisement
Table of Contents
