Table of Contents
Advertisement
5. Unpack the transducer in the ship's bottom.
6. Dismount the fixing flanges from the casings, and then fix the transducers to
flanges appropriately.
Referring to the stickers on the vinyl packing of transducer or beam No. on transducer
cable, mount the transducers as below.
Transducer casing, bottom view
Fig. 2-14 Transducer casing, bottom view and beam direction
7. Pass the transducer cable through the thru-hull pipe. Tighten the cable gland,
leaving a cable slack of 0.5 to 1 m below the cable gland.
8. Mount fixing flange with the transducer onto the casing. Take care not to pinch the
transducer cable. Never hold the transducer by the cable. Shock will most assuredly
damage the transducer.
Transducers
Fig.2-13 Mounting transducers on flanges
Bow
Nipple of transducer should be met
to notch of fixing flange.
2-10
Fixing palte
Beam No.
Direction of main beam
Nipple
Advertisement
Table of Contents
