Setting The Clock - Samsung VR9260 Owner's Manual

VCR Setup

Setting the Clock

The VCR has an internal clock which is used to turn the VCR on and off for timer recording.
Automatically Setting the Clock
When the AUTO CLOCK SET feature is selected, the VCR automatically updates its internal clock using
Coordinated Universal Time information transmitted by some broadcast stations. If the VCR is connected to a
cable box or DSS ® box, cable box or DSS ® box setup must be completed first (see page 5). Clock is activated
when the cable box is tuned to the PBS channel.
1 Press MENU on the remote control. Press
select "Clock set/adjust."
Press ❿ to select AUTO.
2
3
Clock data CH : If you select AUTO, the VCR will
automatically tune to a channel providing time data.
This may take the VCR up to 20 minutes. You can also
tune the VCR manually to a channel that you know
carries time information (PBS channel) with the ➛!❿
buttons.
Time zone : If you select AUTO for your time zone, the
VCR sets the clock using the first Coordinated Universal
Time information it finds. If the time is not correct, select
another time zone.
Daylight Savings Time : If you select AUTO, the VCR
sets the clock using the DST information broadcast in the
signal (channel). If you select YES, Daylight Savings
Time is observed:
Spring : The clock changes forward one hour on the first Sunday in April
Autumn : The clock changes back one hour on the last Sunday in October.
4 Press MENU when you finish setting the clock.
If you selected AUTO CLOCK, the VCR clock will be
set automatically when the VCR is turned off.
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time.
Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 20 minutes, set the
time and date manually.
8
and ❿ to
MAIN MENU
Timer recording
❿ Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[ ❷ % /❿] [MENU/EXIT]
CLOCK SET/ADJUST
❿ AUTO
MANUAL
Select [ ] and press [❿]
❷ ! % !
❷ % [ /❿] [MENU/EXIT]
CLOCK SET/ADJUST
❿ Clock data CH: [AUTO]
Time zone : [AUTO]
Do you observe [AUTO]
DST in summer?
[ /➛❿] [MENU/EXIT]
❷ %
VCR Setup
Manually Setting the Clock
1 Press MENU on the remote control. Press
select "Clock set/adjust."
and ❿ on the remote control to select MANUAL.
2 Use
3 The first clock setting display appears.
and press ❿ to
To enter the current time, press or
move to the the next setting.
4 To enter the current month and date, press
press ❿ to move to the next setting.
5 To enter the current year, press or .
The day of the week is automatically added after you set
the year.
6 Press the MENU button to start the clock.
Press the MENU button again when you finish setting
the clock.
and ❿ to
MAIN MENU
Timer recording
❿Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
❷ % [ /❿] [MENU/EXIT]
CLOCK SET/ADJUST
AUTO
❿ MANUAL
Select [ ] and press [❿]
❷ ! % !
[ ❷ % /❿] [MENU/EXIT]
CLOCK SET/ADJUST
TIME DATE YEAR
A
12:00 1/01 2002 TUE
M
❷ % ! [ /➛❿] [MENU/EXIT]
or and
CLOCK SET/ADJUST
TIME DATE YEAR
9:00 P 5/05 2002 SUN
M
[ ❷ % ! /➛❿] [MENU/EXIT]
CLOCK SET/ADJUST
TIME DATE YEAR
9:00 P 5/05 2002 SUN
M
[ ❷ % ! /➛❿] [MENU/EXIT]
9