Getting Information - JVC DLA-G150 Instructions Manual

Menu Operations

Getting Information

You can get information on the input signal, accumulated used hours of light-source lamp, etc.
1
Press the MENU button.
The main menu appears on the screen.
2 Select "Information" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
The "Information" will be displayed in the main menu.
*No submenu can be selected.
Video main menu
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
Input: Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO or COMP, or PC1, PC2 or DVI)
Switcher: This display currently has no meaning. This is reserved for future use. ("CH.0" is usually displayed to
indicate that it is not being used.)
Source: Shows the projected image's type of video signal. (Video menu mode)
Resolution: Shows the resolution of the video signal being received. (PC menu mode)
It may not be displayed correctly with some input signals.
Frequency H: Shows the horizontal frequency of the video signal being received. (PC menu mode)
Frequency V: Shows the vertical frequency of the video signal being received. (PC menu mode)
Lamp time: Accumulated used hours of the light-source lamp.
3
Press the MENU button to exit the menu mode.
56
VIDEO
Input
Switcher CH.0
Source NTSC
Lamp time 123 h
PC main menu
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
PC 1
Input
Switcher CH.0
Resolution 1280 1024
Frequency H 79.9 kHz
Frequency V 75 Hz
Lamp time 123 h