sebaKMT HL 50 User Manual page 9

The following picture shows the control panel of the device.
Element Description
Display
On the screen you find the following information:
Headphones OFF
Frequency Filter
The currently measured level is displayed as a dimensionless numerical value
between 1-99.
The bar also reflects the current level. The arrow below the bar marks the
most recently saved measurement value.
Operating keys
Filter button
Select frequency filter (3 settings LOW / HIGH / ALL)
Volume buttons
Increase / decrease headphone volume
(Attention: this ONLY applies to corded headphones, NOT to wireless
headphones)
I/O button
Long press
Short press ... starts / stops the ongoing measurement:
ALL
...
... switches the device on / off
headphones are activated / deactivated at the same time
9
34
Current
Level
English