Advanced Operations; Using The On-Screen Bar - JVC TH-A55AH Instructions Manual

Advanced operations

This section explains advanced operations for disc playback using
the remote control.
• shows the types of discs an operation is
available for.
• Turn on your TV and select the correct input mode on the TV.
NOTE
• If "B" appears on the TV screen when pressing a button, the disc
cannot accept an operation you have tried to do or information
required for that operation is not recorded to the disc.

Using the on-screen bar

You can check disc information while the disc is loaded and you
can use some functions using the on-screen bar.
IMPORTANT
Before using the remote control for the following
operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
Cursor
(3/2///5)
/ENTER
Showing the on-screen bar
7 Whenever a disc is loaded
Press ON SCREEN.
Each time you press the button, the on-screen bar changes as
follows on the TV screen.
Example: During DVD playback
(The on-screen bar disappears)
(back to the beginning)
37
OFF
7 Contents of the on-screen bar during playback
DVD
Video CD
SVCD
CD
A Shows disc type.
B Shows current transfer rate (Megabits per second).
C Shows current title (for DVD).
D Shows current chapter number (for DVD) or track number (for
other type of discs).
E Shows time information. (A pg. 38)
F Shows playback status.
: appears during playback.
/ : appears during fast forward/reverse.
/ : appears during playback in forward slow-motion/
reverse slow-motion.
: appears when paused.
: appears when stopped.
G Select this to change time information (E). (A pg. 38)
H Select this for Repeat Playback. (A pg. 48)
I Select this for time search function. (A pg. 40)
J Select this for chapter search function. (A pg. 39)
K Select this to change audio language or channel. (A pg. 43, 44)
L Select this to change subtitle language. (A pg. 43)
M Select this to change view angle. (A pg. 42)
N Select this for Program Playback. (A pg. 47)
O Select this for Random Playback. (A pg. 48)