Program Playback - JVC TH-A55AH Instructions Manual

Advanced operations

Program Playback

You can play up to 99 tracks in any order.
You may program the same track more than
once.
Cursor
(3/2///5)
/ENTER
7 While stopped
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to move
3
Press ENTER.
The program menu appears on the TV screen.
• 10 orders appear at a time.
4
Press number buttons (1-10, +10) to
specify selections by track.
• At each program order use number buttons to specify track
number.
Example:
To specify "track 3": Press 3.
5
Repeat step 4 to program following
orders.
Each time you enter a track number in the order at the bottom
of the program menu, the program menu scrolls and the
following orders appear.
To erase an order
Press Cursor //5 to move H to the order to be erased, then
press CANCEL.
47
6
(play button)
To check the program contents
During playback, press 7. Playback stops and the program menu
appears.
To bring up the menu without stopping playback, carry out steps 1
to 3.
• You can also check playback status in the on-screen bar by
pressing ON SCREEN.
To stop Program Playback
Number buttons
Press 7. Note that program setting remains.
To clear the program
While stopped and the program menu is shown on the TV screen,
press 7.
All of the programmed tracks are erased. You can also clear the
program by turning off the system.
To quit the Program mode
After clearing all programmed tracks, press 3 (play button).
H
to .
The program menu disappears.
NOTE
• During Program Playback, you cannot edit program contents.
• During Program Playback, pressing ¢ skips to the next program
selection. Pressing 4 returns playback to the beginning of the
current selection.
• The Resume function cannot be used with Program Playback.
• To close the program menu:
Press ON SCREEN. The program menu is closed and the on-screen
bar is shown.
• To turn off the on-screen bar:
Press ON SCREEN repeatedly.
• Program Playback function cannot be used during Video CD/SVCD
playback with PBC function.
• If you want to repeat the programmed tracks, set the Repeat mode
during Program Playback. (A pg. 48)
• Program Playback may not work for some discs.
Press 3 (play button) to start Program
Playback.
When all of the programmed tracks have been played back,
playback stops and the program menu appears again. Note that
program setting remains.
When playing back an Audio CD:
The program menu remains on the TV screen during Program
Playback.