Speaka Professional XD2465 Assembly Instruction

Speaka Professional XD2465 Assembly Instruction

Fits for 10-32in plasma and lcd tv, weight capacity: 15kg 33 lbs

Advertisement

ASSEMBLY INSTRUCTION
Please read this instruction carefully before assembly.
Fits for 10-32in plasma and LCD TV.
Weight Capacity : 15KG (33 LBS).
MODEL XD2465

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XD2465 and is the answer not in the manual?

Questions and answers

Summary of Contents for Speaka Professional XD2465

  • Page 1 ASSEMBLY INSTRUCTION MODEL XD2465 Please read this instruction carefully before assembly. Fits for 10-32in plasma and LCD TV. Weight Capacity : 15KG (33 LBS).
  • Page 2 Safety Warning: Never let children climb on product or play with product. Do not sit or stand on product. Do not fasten a TV that is heavier than the recommended load rating to the mount. Using suitable on concrete wall or wood stud wall. Improper installation may cause property damage and/or personal injury, so the installation must be done by two qualified contractors.
  • Page 3 Step 1 Hold wall plate ( ) against wall at desired position on concrete wall, then using a pencil mark 2 hole locations . Then drill holes according pencil marks using 2/5" or 10mm size drill bit to a depth of 2.36"/60mm . Then you will need to use wall anchors(B). Insert wall anchors(B) into holes, you may need to use hammer to lightly tap wall anchors into wall .
  • Page 4 Step 3 You can touch the screen to adjust the angle automatically. If it is too loose, you can tighten the nuts by wrench as the below drawing shown Figure 5 PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TV MOUNTS TO THE BACK PANEL OF TV IN STEP 2 .

This manual is also suitable for:

1217448

Table of Contents