Table of Contents
Advertisement
ID
Name
1
Admin
CPU usage:
Slot 0 CPU 0:
ID
Name
1
Admin
Slot 3 CPU 0:
ID
Name
1
Admin
2.
Display MDC configuration.
[Sysname] display current-configuration configuration mdc
#
mdc Admin id 1
#
mdc mdcA id 2
mdc start
#
Return
The output shows that all service modules belongs to the default MDC.
3.
Reclaim the service module in slot 3 of chassis 1 from the default MDC.
[Sysname] mdc Admin
[Sysname-mdc-1-Admin] undo location chassis 1 slot 3
The configuration associated with the specified slot of MDC will be lost. Continue?
[Y/N] :y
4.
Verify that the service module does not belong to the default MDC.
[Sysname-mdc-1-Admin] display this
#
mdc Admin id 1
undo location chassis 1 slot 3
#
Return
5.
Assign the service module to the mdcB.
[Sysname-mdc-2-mdcA] mdc mdcB
[Sysname-mdc-3-mdcB] location chassis 1 slot 3
6.
Verify that the service module belongs to mdcB.
[Sysname-mdc-3-mdcB] display this
#
mdc mdcB id 3
location chassis 1 slot 3
mdc start
#
Return
7.
If the issue persists, contact H3C Support.
Quota(MB)
Used(MB)
7900.6
143.0
Weight
Usage(%)
10
0
Weight
Usage(%)
10
10
73
Available(MB)
7757.7
Advertisement
Table of Contents
Troubleshooting
