H3C S12500G-AF Series Troubleshooting Manual page 22

2. Power on the device.
System is Starting...
Press Ctrl+D Into xmodem mode
Press Ctrl+T to start memory test
Booting Normal Extend Bootware
Press Ctrl+V to start heavy memory test
****************************************************************************
*
*
*
****************************************************************************
Compiled Date
Basic BootWare
CPU Type
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
Flash Size
BASIC CPLD Version
EXTENDED CPLD Version : 2.0
PCB Version1
PCB Version2
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
3. Press Ctrl + B within 3 seconds after the "Press Ctrl+B to access EXTENDED-BOOTWARE
MENU..." prompt message appears.
The extended BootWare menu is displayed:
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Ethernet SubMenu
|<3> File Control
|<4> Restore to Factory Default Configuration
|<5> Skip Current System Configuration
|<6> Skip Authentication for Console Login
|<7> BootWare Operation Menu
|<8> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+F: Format File System
Ctrl+C: Display Copyright
MPU BootWare, Version 3.02
: Apr 28 2019 10:27:24
: 0107
: C2538
: 2400MHz
: DDR3 SDRAM
: 16384MB
: 1333MHz
: 3630MB
: 2.0
: Ver.A
: Ver.A
18
*
*
*
|
|
|
|
|
|
|
|
|