H3C S12500G-AF Series Troubleshooting Manual page 23

Hide thumbs Also See for S12500G-AF Series:
Table of Contents

Advertisement

Enter your choice(0-8):
4. Enter 6 to skip console login authentication.
Enter your choice(0-8): 6
Clear Image Password Success!
The extended BootWare menu is displayed again:
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Ethernet SubMenu
|<3> File Control
|<4> Restore to Factory Default Configuration
|<5> Skip Current System Configuration
|<6> Skip Authentication for Console Login
|<7> BootWare Operation Menu
|<8> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-8):
5.
Enter 0 to reboot the device. The device will ignore the console login password to access the
CLI and load the next-startup configuration file.
Enter your choice(0-8): 0
System is Starting...
Press Ctrl+D Into xmodem mode
Press Ctrl+T to start memory test
Booting Normal Extend Bootware
Press Ctrl+V to start heavy memory test
6. After the device starts up, configure a new console login password. You can also configure a
different login authentication mode.
<Sysname> system-view
[Sysname] line aux 1/1
[Sysname-line-aux1/1] authentication-mode password
[Sysname-line-aux1/1] set authentication password simple abc123
[Sysname-line-aux1/1] return
7. Save the running configuration to use the configuration at the next reboot.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N] :y
Please input the file name(*.cfg)[flash:/default.cfg]
(To leave the existing filename unchanged, press the enter key):default.cfg
Validating file. Please wait....
Saved the current configuration to mainboard device successfully.
Changing the console login password when password recovery capability is disabled
IMPORTANT:
Restoring the factory-default configuration deletes the next-startup configuration files.
To change the console login password when password recovery capability is disabled:
19
|
|
|
|
|
|
|
|
|

Advertisement

Table of Contents
loading

Table of Contents