Using The Telephone; Getting To Know Your Telephone - Gigaset N210 PRO Manual

Getting to know your telephone

Switch the handset on/off
Switch on: When the handset is switched off, press and hold the End call key
Switch off: When the handset is in idle status, press and hold the End call key
Lock/unlock the keypad
The keypad lock prevents any accidental use of the telephone.
Lock/unlock the keypad:
Keypad lock activated: the following symbol appears
PIN-protected keypad lock
Once you have assigned a PIN (not 0000) to the handset, you must enter this PIN to cancel the
keypad lock.
Setting up a handset PIN:
Define emergency numbers that can be dialled even when the keypad lock is PIN-protected:
p. 60
If a call is indicated on the handset, the keypad automatically unlocks and you can
accept the call. It then locks again when the call is finished.
Control key
The control key enables you to navigate the menus and input fields, and also to
call up certain functions depending on the situation.
In the description below, the side of the control key (up, down, right, left) that you have to press
in the different operating situations is marked in black, e. g.
key" or for "press the centre of the control key".
When the phone is idle
Open the main menu
Open the directory
Open the list of handsets
Set the voice volume for receiver / handsfree function
Set the microphone sensitivity

Using the telephone

Press and hold
p. 62
Getting to know your telephone
for "press right on the control
or
Press briefly
Press and hold
11