Cognex DS1000 Series Quick Start Manual

Hide thumbs Also See for DS1000 Series:

Standard Components

The vision controller is shipped with the components listed below.

Note:

If any of the standard components appear to be missing or damaged, immediately contact your Cognex

Authorized Service Provider (ASP) or Cognex Technical Support.

Cables are sold separately.

Table 1-1: Standard Components

Cognex Vision Controller (1)

(VC5: P/N 821-0102-xR; P/N 821-0119-xR)

Terminal Block Accessory Kit (1)

(P/N 820-9126-xR)

INPUTS terminal blocks (2)

OUTPUTS terminal blocks (2)

ENCODER terminal blocks (2)

24VDC power connector (1)

Quick Start Guide (1)

(P/N 590-7179)

Component

Table of Contents

Do you have a question about the DS1000 Series and is the answer not in the manual?

Page 1 Standard Components The vision controller is shipped with the components listed below. Note: If any of the standard components appear to be missing or damaged, immediately contact your Cognex Authorized Service Provider (ASP) or Cognex Technical Support. Cables are sold separately.
Page 2 Installation This section describes the connection of the vision controller to its standard and optional components. For a complete list of options and accessories, contact your Cognex sales representative. Note: Cables are sold separately. CAUTION: All cable connectors are “keyed” to fit the connectors on the vision controller; do not force the connections or damage may occur.
Page 3 Note: The installation steps in this document describe the basic connection of the Cognex industrial GigE camera to the vision controller. For additional usage information, refer to the Cognex Industrial Cameras Getting Started Guide, included with your camera.
Page 4 Installation Connect the Cognex DS1000 Series Sensor Note: The installation steps in this document describe the basic connection of the Cognex DS1000 series sensor to the vision controller. For complete DS1000 series sensor installation instructions, specifications and precautions, refer to the DS1000 Series Displacement Sensors Quick Reference Guide, included with your sensor.