Table of Contents
Advertisement
To start cooking
1
2
0
1
2
3
3
0
1
2
3
While cooking, you can move your pan to any place on the cooking surface while keeping
the selected settings. The heat level in the previous position of the pan will be automatically
transferred to the new position.
Ensure that you only move one pan at a time. Moving pans simultaneously will result in
inconsistent detection of pans or incorrect pan display. An error will be displayed if the pans
are not detected and incorreclty positioned.
If the pan is lifted, the pan display will stay for about 20 seconds. After then all settings will
reset automatically.
USING YOUR COOKTOP
07 : 20
4
5
6
7
8
9
07 : 20
4
5
6
7
8
9
Touch and hold
turn on the cooktop.
Place a suitable pan anywhere on the
cooking surface
Ensure the bottom of the pan and
z
cooking surface are clean and dry.
Once the pan is placed on the cooking
surface, a heat level selector is displayed
B
at the bottom of the touchscreen.
Select the pan icon on the display, and
then select the desired heat level by
touching or sliding along the power slider
with your finger.
If heating level is not selected within
z
20 seconds, the cooktop automatically
goes to standby mode.
B
You can modify the heat setting at any
z
time during cooking.
for two seconds to
13
Advertisement
Table of Contents
