Finding The Beginning Of A Tune - JVC KW-XC770J Instructions Manual

Finding the beginning of a tune

Multi Music Scan allows you to automatically start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead or before the current tune.
1
During playback
To locate a tune ahead
of the current tune on
SSM
the tape
To locate a tune before
the current tune on the
tape
When the beginning of the specified tune is located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other
side.
• In the following cases, Multi Music Scan may not operate correctly.
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions
during tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
– The Dolby NR setting does not match. For example, if the tape is recorded with the Dolby C NR.
1
Specify where (how many tunes
ahead of or before the current tune)
the tune you want is located.
Each time you press the button, the number
changes up to ±9.
ANA
17