Call Display Service; Using Call Display Service - Panasonic KX-TGF342C Operating Instructions Manual

Call Display Service

Using Call Display service

Important:
R This unit is Call Display compatible. To use
Call Display features, you must subscribe
to a Call Display service. Contact your
phone service provider for details.
Call Display features
Handset / Base unit
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
*1
– "Unavailable" /"Unavailable
*2
: The caller dials from
Name & No."
an area which does not provide a Call
Display service.
– "Private caller"
The caller requests not to send caller
information.
*1
– "Long distance"
The caller makes a long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
*1 Handset
*2 Base unit
Missed calls
Handset / Base unit
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed
call".
Note:
R Even when there are unviewed missed
calls, "Missed call" disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing MOFFN on a handset.
For assistance, visit www.panasonic.ca/english/support
40
– Pressing MEXITN on the base unit.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Talking Call Display
Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Call Display service of your
phone service provider.
– turn this feature on (page 30, 33).
When caller information is received, the
handsets and/or base unit announce the
caller's name or phone number received from
your phone service provider following every
ring.
R Name pronunciation may vary. This feature
*1 *2
/"Private" :
may not pronounce all names correctly.
R Call Display service has a limit of how
many characters can be displayed. If the
*2
/"Long dist." :
caller's name is too long, the unit may not
be able to display or announce the entire
name.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
For Call Waiting Deluxe service
users
To use Call Waiting Deluxe, you must
subscribe to Call Waiting Deluxe from your
phone service provider. This feature not only
allows the unit currently in use to display the
2nd caller's information, but also offers you a
variety of ways to deal with the 2nd call.