General Design - Trane CyberAir DX Installation, Operation And Maintenance Manual

Introduction

General Design

The CyberAir unit is housed in a steel frame type cabinet
and is rated for indoor use. The cabinet is coated with a
durable powder coat finish to protect against corrosion.
Hinged doors are located on the front of the cabinet. The
doors may be removed for easy access to all internal
components. Operator controls are conveniently located
on the front of the cabinet. CyberAir systems are available
with up-flow or down-flow air discharge patterns. Cabinet
sizes vary according to system capacity. The following
Figure 2. Up-flow Models Front Free Return
8
figures depict the internal layouts of up-flow and down-
flow CyberAir units and identifies the major components.
Location of the major components may vary depending on
model number and options purchased.
Note: Customer specified, non-standard features or
2 - 3 Way Discharge
Plenum (Optional)
Air Filters Are Behind
Cabinet Doors (All Front
Return Models)
Air Flow
design variations may not be described in this
manual. Refer to the installation and/or electrical
drawings supplied with your unit for details on
additional feature(s). In some cases an addendum
to this manual may also be included to further
describe the feature(s).
Air Flow
Hot Water Reheat
Plenum (Optional)
Air Flow
SS-SVX002B-EN