Selecting The Level Display (Only For Kd-Sx840) - JVC KD-SX740J Instructions Manual

To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation:
Frequency
• If the unit is not in use when you press DISP, the power turns on, the clock time is shown for
5 seconds, then the power turns off.
Selecting the level display
This section is ONLY FOR KD-SX840.
You can select the level display according to your preference. When shipped from the factory,
the level indicator on the display shows the audio level setting.
AUDIO: Audio level indicator
OFF : Volume level indicator
3
1
SEL
2
3
18
During CD operation:
Elapsed
Clock
playing time
1 2
Press and hold SEL for more than 2 seconds.
"CLOCK H," "CLOCK M," "LEVEL" or "AREA" appears on the
display.
Select "LEVEL" if not shown on the display.
Select the desired mode with the control dial.
SEL
During CD changer operation:
Elapsed
Clock
playing time
Disc
Clock
number