Turning On/Off The Key-Touch Tone (Only For Kd-Sx838R); Selecting The Level Display (Only For Kd-Sx838R/S737R) - JVC KD-S707R Instructions Manual

Turning on/off the key-touch tone
This function is ONLY FOR KD-SX838R.
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. (When shipped from the factory, the key-touch tone is activated.)
1
SEL
2
3

Selecting the level display (only for KD-SX838R/S737R)

You can select the level display according to your preference.
1. Press the SEL button for more than 2 seconds to set the preferred setting mode.
2. Select "LEVEL" with the ¢
3. Select the desired mode with the + or - button.
Volume level (OFF) Ô Signal level (AUDIO) (see page 25)
26
1 3 2
Press and hold the button for more than 2
seconds to set the preferred setting mode (see
page 25).
Select "BEEP" if not shown on the display.
SSM
To activate the key-touch tone (ON).
To deactivate the key-touch tone (OFF).
or 4
button.