Using A Bluetooth Mobile Phone - JVC KD-R720 Instructions Manual

If "PAIRING" = "PIN 0000" scrolls on
the display...
] Enter a PIN (Personal Identification
Number) code to the Bluetooth device.
•
You can change the PIN code of your choice
before pairing. (page 16) [ Initial: 0000 ]
(B) If "BT PAIRING" flashes, then
"[Device name]" = "XXXXXX" =
"VOL – YES" = "BACK – NO" scrolls on
the display.
] Check to be sure the passkey appears
on the unit and Bluetooth device is the
same. Then, confirm the passkey on the
unit by pressing the control dial. Operate
the Bluetooth device to confirm the
passkey.
•
"XXXXXX" is a 6-digit numeric code that
appear in different combination (even if the
device is the same) each time pairing is made.
5
After pairing is successful, the unit will
establish Bluetooth connection with the
Bluetooth device*. ( lights up on the
display.)
• The device remains registered even
after you disconnect the device. Use
<CONNECT PH/ CONNECT AU> (or
activate <AUTO CNNCT>, page 16) to
connect the same device from next time
on.
*
Some devices may not be able to connect to the
unit after pairing. Connect the device to the
unit manually.

Using a Bluetooth mobile phone

Making a call
1
] Enter "Hands-Free" screen.
2
] Select a calling method or make
a setting. (DIALED/ RECEIVED/
MISSED CALL/ PHONEBOOK/
DIAL NUMBER/ VOICE/ SETTINGS)
12 ENGLISH
To delete a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3 Turn the control dial to select
<DELETE PAIR>, then press to confirm.
4 Turn the control dial to select a device
you want to delete, then press to confirm.
5 Turn the control dial to select
<DELETE YES>, then press to confirm.
"DELETED" appears when the device is
deleted.
If < DELETE NO> is selected, the unit returns
to step 4 above.
To connect/disconnect a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3 Turn the control dial to select
<CONNECT PH/ CONNECT AU> or
<DISCONNT PH/ DISCONNT AU>, then
press to confirm.
4 Turn the control dial to select a device
you want to connect/disconnect, then
press to confirm.
"CONNECTED/ DISCONNECT" = "[Device
name]" scrolls on the display when the
device is connected/disconnected.
3 If DIALED/ RECEIVED/ MISSED CALL/
PHONEBOOK is selected in step 2 ...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• "NO HISTORY" appears if there is no
history stored.
• "NO DATA" or "SEND P. BOOK" j
"MANUALLY" appears depending on the
"P. BOOK SEL" settings. (page 13)