Page 1
ENGLISH KD-R726 CD RECEIVER / Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit For canceling the display demonstration, see page 4. / For installation and connections, refer to the separate manual.
Page 2
U.S. and other countries. Caution on volume setting: Digital devices (CD/USB) produce very little JVC bears no responsibility for any loss of data noise compared with other sources. Lower the in an iPod/iPhone and/or USB mass storage volume before playing these digital sources to class device while using this System.
How to attach/detach the control CONTENTS panel 3 How to attach/detach the control panel 3 How to reset your unit 3 How to forcibly eject a disc 3 Maintenance Canceling the display demonstration How to reset your unit Setting the clock Your preset adjustments will Preparing the remote controller also be erased.
Canceling the display demonstration Turn on the power. Select <DEMO OFF>. [Hold] (Initial setting) Finish the procedure. (Initial setting) Setting the clock Turn on the power. [Hold] (Initial setting) Select <CLOCK>. Select <CLOCK SET>. Adjust the hour. (Initial setting) Adjust the minute. Finish the procedure.
Preparing the remote controller Caution: When you use the remote controller for the first time, pull out the insulation sheet. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat Insulation sheet such as sunshine, fire, or the like.
Basic operations Loading slot Display window Ejects the disc Control dial Remote sensor AUX (auxiliary) input jack • DO NOT expose to bright sunlight. Detaches the panel USB (Universal Serial Bus) input terminal When you press or hold the following button(s)... Remote Main unit General operation...
Listening to the radio • [Press] Searches for stations automatically. Ÿ • [Hold] Searches for stations manually. “M” flashes, then press the button ] “FM” or “AM” repeatedly. “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Improving the FM reception Manual presetting (FM/AM) You can preset up to 18 stations for FM and...
Title assignment You can assign titles up to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. • If you try to assign titles to more than 30 station frequencies, “NAME FULL” appears. Delete unwanted titles before assignment. Repeat step 3 until you have finished entering the title.
Page 9
Using the remote controller Selecting the playback modes 5 / ∞ : Selects folder of the MP3/WMA. You can use only one of the following playback 2 / 3 : [Press] Selects track. modes at a time. [Hold] Fast-forwards or reverses the track.
Listening to a USB device This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit). You can use these two terminals at the same time. You can operate the USB device in the same way you operate the files on a disc. (page 8, 9) •...
• A maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time. Use the Bluetooth device to search and select “JVC Unit.” • For some Bluetooth devices, you may ] Turns on the power.
To delete a registered device If “PAIRING” = “PIN 0000” scrolls on 1 Press and hold MENU. the display. 2 Turn the control dial to select ] Enter a PIN (Personal Identification <BLUETOOTH>, then press to confirm. Number) code to the Bluetooth device. 3 Turn the control dial to select •...
Page 13
If DIAL NUMBER is selected in step 2 ... • To search through the phonebook, see page 14. Enter the phone number to dial. Selectable only when the connected phone supports PBAP. Turn the control dial to select a number or character (see table below), press AUTO ANSWER •...
Page 14
To select a contact from the phonebook Receiving/ending a phone call 1 Select PHONEBOOK calling method. When a call comes in, the source is (page 12) automatically changed to “BT FRONT/ BT REAR.” 2 Press 5/∞ to show the search menu •...
To switch between two connected mobile Arriving of a text message phones When a text message comes in, the unit rings When two mobile phones are connected to if your mobile phone is compatible with text the unit, you can access to both “Hands-Free” message and “MSG NOTICE”...
: Shows connected phone name. / AU CNNT DEV * : Shows connected audio device name. / MY BT NAME : Shows the unit name (JVC Unit). / MY ADDRESS : Shows address of USB Bluetooth Adapter. Will not display if two Bluetooth phones are connected at the same time.
Bluetooth connection is disconnected. Continue the conversation using your mobile phone. • When the unit is turned off, the device is disconnected. • If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/index.html> (English website only).
Page 18
Selecting a track from the menu • If your iPod/iPhone contains many tracks, searching take some time. Not applicable under <IPOD MODE/ • Searching may not work on some of the layers APP MODE>. of the selected menu. Selecting the playback modes Not applicable under <IPOD MODE/ APP MODE>.
Using the iPod/iPhone application You can operate JVC original application (eg. JVC Drive Smart) with this unit in <APP MODE>. For JVC Drive Smart operations, visit JVC web site: <http://www.jvc.co.jp/english/car/index.html> (English website only) Additional information • Made for • It is not possible to browse video files on the “Videos”...
Selecting a preset sound mode You can select a preset sound mode suitable Storing your own sound mode for the music genre. You can store your own adjustments in memory. [Hold] FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) ] <PRO EQ>...
Menu operations Repeat step 2 if necessary. [Hold] • To return to the previous menu, press BACK. If no operation is done • To exit from the menu, press for about 60 seconds, the MENU. operation will be canceled. Menu item Selectable setting, [ Initial: Underlined ] DEMO ON : Display demonstration will be activated automatically if no operation is done for...
Page 22
Menu item Selectable setting, [ Initial: Underlined ] BRIGHTNESS DAY [ 31 ] / NIGHT [ 15 ] : Customizes the display and button illumination brightness level [ 00 — 31 ] for day and night. SCROLL * ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second intervals).
Menu item Selectable setting, [ Initial: Underlined ] Displayed only when the source is “FM.” For settings, see page 7. MONO Displayed only when the source is “FM.” For settings, see page 7. IF BAND AUTO : Increases the tuner selectivity to reduce interference noises between adjacent stations.
Page 24
Symptom Remedy/Cause Nothing appear on the display. Check the <COLOR SETUP> setting. (page 21) The correct characters are not displayed This unit can only display letters (upper case), numbers, and a (e.g. album name). limited number of symbols. SSM automatic presetting does not work. Store stations manually.
Page 25
Symptom Remedy/Cause “USB ERROR” = “REMOVE USB” = An over-current occurs. Turn off, then turn on the unit. “PWR OFF/ON” scrolls on the display. “NO FILE” appears on the display. Check whether the selected folder, the connected USB device, or the iPod/iPhone contains a playable file. “NOT SUPPORT”...
Page 26
Reset the unit and try the operation again. If “HW ERROR” appears again, display. consult your nearest JVC car audio dealer. The iPod does not turn on or does Check the connecting cable and its connection. / Charge the battery of the not work.
Wow and Flutter : Less than measurable limit use of such marks by Victor Company of MP3 Decoding Format (MPEG1/2 Audio Japan, Limited (JVC) is under license. Other Layer 3) : Max. Bit Rate: 320 kbps trademarks and trade names are those of WMA (Windows Media®...