Table of Contents
Advertisement
Bluetooth®
Bluetooth®
2
Select the device (
1
) you want to connect,
then touch [Connection] (
3
Select the device (
1
) to connect, then
return to the <Paired Device List> (
Select [ON] (to connect) or [OFF] (to disconnect).
: Mobile phone
: Audio device
4
Connect the selected device.
• The status is shown as follows:
<Connecting>: Connection is in progress.
2
).
<Connected>: A connection has been established.
<Connect Ready>: A connection is ready to be
established.
<Disconnecting>: Disconnection is in progress.
<Disconnected>: No connection is established.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
To delete the registered device: Perform step 1,
select the device you want to delete in step 2, then
2
).
touch [Remove].
• A confirmation message appears. Touch [Yes].
Bluetooth mobile phone
When a call comes in...
Touching the operation keys performs the following
actions:
[ ]
[
]
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from the rear view camera is displayed.
Answers a call.
Rejects a call.
• For KW-V250BT Region 3/KW-V250BTM Region 2:
When receiving a call during navigation guidance,
the screen is switched automatically.
– To return to the navigation screen, touch [
During a call...
Touching the operation keys performs the following
actions:
[
]
Ends a call.
[
] /
Switches between handsfree mode and
[
]
phone mode.
[DTMF]
Enters DTMF (Dual Tone Multi
Frequency), then sends text using the
keypad.
NR LEVEL
Adjusts the noise reduction level.
[–] / [+]
(–5 to 5)
EC LEVEL
Adjusts the echo volume level.
[–] / [+]
(–5 to 5)
MIC LEVEL
Adjusts the volume level of the
[–] / [+]
microphone. (–10 to 10)
• Press the volume + / – buttons on the monitor panel
to adjust the volume of the call or earpiece.
].
ENGLISH
23
Advertisement
Table of Contents
