Additional Information - JVC KD-R720 Instructions Manual

Menu item
CONNECT PH * 1
CONNECT AU
DISCONNT PH/
DISCONNT AU
DELETE PAIR
P. BOOK WAIT
SET PINCODE
AUTO CNNCT
INITIALIZE
INFORMATION
*
1 Will not display if two Bluetooth phones are connected at the same time.
*
2 Displayed only when a Bluetooth phone/audio player is connected.

Additional information

• If you wish to perform complicated operations (such as dialing the numbers, using phonebook, etc.), stop your car in
a safe place.
• Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
• If you connect a different USB Bluetooth Adapter, all the registered devices and information will be cleared.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on the circumstances around you.
• If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call
conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
• When the unit is turned off, the device is disconnected.
• If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/index.html> (English website only).
16 ENGLISH
Selectable setting, [ Initial: Underlined ]
Turn the control dial to select a device you want to connect. "CONNECTED" = "[Device Name]"
/
scrolls on the display when the device is connected.
Turn the control dial to select a device you want to disconnect. "DISCONNECT" =
"[Device Name]" scrolls on the display when the device is disconnected.
Turn the control dial to select the device you want to delete, then press the control dial to confirm.
DELETE YES : Confirm to delete the selected device. / DELETE NO : Cancels.
You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need
to enter the PIN code or verify passkey from the mobile phone to do pairing. You can transfer a
maximum of 400 numbers.
You can change the PIN code of your choice before pairing (1-digit to 6-digit number).
[ Initial: 0000 ]
Turn the control dial to select a number, press 4
then press the control dial to confirm the entry.
ON : The connection is established automatically with the registered Bluetooth device when
you turn on the unit. / OFF : The unit does not connect the Bluetooth device automatically. Use
<CONNECT PH/ CONNECT AU> to connect.
YES : Initialize all the Bluetooth settings (including stored pairing, phonebook, and etc.). /
NO : Cancels.
PH CNNT DEV * 2 : Shows connected phone name. / AU CNNT DEV *
connected audio device name. / MY BT NAME : Shows the unit name (JVC Unit). /
MY ADDRESS : Shows address of USB Bluetooth Adapter.
/¢ to move to the entry position,
2
: Shows