Table of Contents
Advertisement
3.
Standard text entry
With standard text entry you can enter a word by pressing each letter button
a number of times to display the character you want on the screen. For
example, to write the word "Hello", press 4 twice, 3 twice, 5 three times, 5
three times and 6 three times.
4.
Receiving and reading text messages
When you receive a new text message, the icon is displayed along with
« YOU HAVE X NEW MESSAGES ».
-
Do you have two text phone bases connected to the same
phone line?
If you have two text phone base stations plugged into one line, you are likely
to experience problems receiving text messages. Normally, only one SMS
enabled base unit (DECT or cordless) can be plugged into any line.
If you do want to use two base units and still receive written text you must
delete receive service centre number from one of the base stations. To do this
on your Elegant, see page 56. This will allow you to send text via either base
station but texts will only be received on the product with the active receive
centre number.
If the base unit with the active receive centre number is a DECT product then
all handsets registered to it will be able to receive text messages.
5.
Read a new message
Received messages are stored in the Inbox.
1.
The Inbox is opened and the list of messages displayed. If you press
« BACK » the message is stored in the Inbox for reading later.
2.
In the Inbox scroll
Down (to earlier list of messages) through the list of messages.
3.
Highlight the message you want to read and press
« BACK » to return to Text messaging menu.
4.
Press
End/On/Off to return to standby.
Redial/Up (to more recent messages) or Phonebook/
52
« READ » or press
Advertisement
Table of Contents
