VII.
Clock & alarm
1.
Date & time
If you subscribe to your network's caller display service, the base sets the
date and time for all handsets whenever a call is received. You can manually
set the time on an individual handset.
1.
Press
« MENU », scroll Phonebook/Down to « CLOCK & ALARM » and
press « SELECT ».
2.
« DATE & TIME »
3.
Enter the date using the format DD/MM/YY and press
4.
Enter the time and press
5.
Press
« BACK » to return to the previous menu level.
Note: You can set the time to either 12 or 24 hour format, see page 33.
2.
Set alarm
When the alarm is set, the display shows the
Each handset can have a different alarm setting.
1.
Press
« MENU », scroll Phonebook/Down to « CLOCK & ALARM » and
press « SELECT ».
2.
Scroll
Phonebook/Down to « ALARM » and press « SELECT ».
3.
Press
Redial/Up or Phonebook/Down to select « ON » and press « SELECT ».
4.
Press
Redial/Up or Phonebook/Down to select « ONCE », « MON-FRI »
or « ON DAILY » and press « SELECT ».
5.
Enter the time you want the alarm and press
6.
Press
« BACK » to return to the previous menu level.
3.
Alarm on/off
Once an alarm has been set, you can switch the setting on or off.
If the alarm was set to « ONCE » the
If set to « ON DAILY » or « MON-FRI » the
If you are using the handset to make a call when the alarm ring is due, the
flashes and you hear a beep in the earpiece.
is highlighted, press « SELECT ».
« SAVE ».
32
icon.
« SAVE ».
will disappear from the screen.
will remain on the screen.
« SAVE ».