Table of Contents
Advertisement
Important:
Do not store fuel containing
stabilizer/conditioner longer than the
duration recommended by the fuel-stabilizer
manufacturer.
7.
Remove the spark plug(s) and check its
condition; refer to
(page
25). With the spark plug(s) removed from
the engine, pour 2 tablespoons of engine oil
into the spark plug hole. Now use the starter to
crank the engine and distribute the oil inside the
cylinder. Install the spark plug(s). Do not install
the wire on the spark plug(s).
8.
Check and tighten all fasteners. Repair or
replace any part that is damaged or missing.
9.
Paint all scratched or bare metal surfaces. Paint
is available from your authorized Toro distributor.
10.
Store the machine in a clean, dry garage or
storage area. Remove the key from the ignition
switch and keep it out of reach of children or
other unauthorized users. Cover the machine to
protect it and keep it clean.
Servicing the Spark Plugs
31
Advertisement
Table of Contents
