Shuffle Playback; Intro Check - Teac EX-M5 Owner's Manual

To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the
display.
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until
"00" appears on the display. Select a track number using the
Skip button (. or/ ) and then press the MEMORY
button. The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until
the program number to be changed appears on the display.
Select a new track number using the Skip button (.or/)
and then press the MEMORY button.
To clear program
To clear the programmed contents, press the MEMORY and
the STOP button (H) in the stop mode.
< If the OPEN/CLOSE button is pressed, the programmed
contents will also be cleared.
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.

Shuffle Playback

The tracks can be played randomly. Press the SHUFFLE button
during playback or when in the stop mode. "SHUFFLE" will
then light up in the display.
< If you press the / button during shuffle playback, next
track will be randomly selected and played. If you press the
. button, the currently played track will be played from
the beginning. A track cannot be replayed during shuffle
playback.
< Shuffle playback doesn't work during programmed playback.
< If one of the following buttons is pressed, shuffle mode will
be cancelled:
SHUFFLE, STOP, FUNCTION, POWER, OPEN/CLOSE

Intro Check

Press the INTRO CHECK button in the stop mode. The
beginning of all the tracks is played for 10 seconds each.
When a track you want to listen to is found, press the INTRO
CHECK button to resume normal playback.
< To skip to the next or a previous track, press the SKIP button
(.or/).
< To stop Intro Check function, press the STOP button (H).
15