Advertisement
Available languages
Available languages
16
www.raider.bg
can be adjusted smoothly and steplessly from 0 to
1.5 mm, taking into account the value on the scale
(7) located opposite the pointer.
9. On and off.
9.1. To switch on the battery planer, press and
hold the anti-switch button (2). Then press the
start switch (1). To switch off the planer, release
the start switch (1).
10. Working with the cordless grater.
10.1. If possible, work with a small pressure force.
The curb's own weight is sufficient to achieve good
performance. Excessive increase in clamping
force does not increase productivity, but leads to
a drastic decrease in rotational speed, excessive
heating of the engine, damage to the workpiece
and the elements of the planer.
10.2. Bevel edges.
Cuts in the middle of the front part of the base
of the planer "V" - shaped channel facilitates the
rapid processing of the edges of the processed
material. Place the front base with the "V" groove
on the edge of the workpiece and move the planer
forward. When processing the edges, hold the
planer at an angle of 45.
Do not drop the tool or overload it.
Store and handle accessories with care.
Take periodic breaks from work.
11. Service and maintenance.
Never use water or any chemical liquids to clean
the cordless grater. It should be cleaned with
a piece of dry cloth, and the accumulated dust
should be removed with a soft brush. Always keep
the planer in a dry place and keep the ventilation
openings on the housing clean.
11.2 The repair of your power tools is best done
only by qualified RAIDER service specialists,
where only original spare parts are used. This
ensures their safe operation.
11.3. The repair of your power is best carried
out only by qualified professionals repairers of
RAIDER, which used only original spare parts.
Thus it ensuring their safe operation.
12. Preservation of the environment.
In view of environmental power, additional
accessories and packaging must be subjected to
appropriate processing for reuse of the information
contained in these materials.
Do not dispose of cordless household waste!
Under the EU Directive 2012/19/EC on waste
cordlessal and electronic devices and validation
and as a national law power which can be used
more, must be collected separately and be
subjected to appropriate processing for recovery of
contained they scrap.
Advertisement
