Using Your Zp-Ci333 Nano; Configuring Wireless Connection - Zotac ZBOX PRO ZP-CI333 NANO User Manual

• Intel Chipset Driver
• Intel Graphics Driver
• Realtek Ethernet PCI-E Driver
• Wireless Network Driver
• Bluetooth Driver
• Intel Management Engine
• Intel HID Driver
• CardReader Driver
• Intel SerialIO
Each driver must be installed individually to ensure proper operation of the ZP-CI333

NANO.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.

Using your ZP-CI333 NANO

Configuring a wireless connection
Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon in the notification area.
2. Select the wireless network you want to connect to from the list
and click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
23