Table of Contents
Advertisement
HAUBER-Elektronik GmbH
2
Safety information
2.1
General
The safety instructions are intended to protect people and property from damage and hazards
that could arise as the result of improper use, incorrect operation or other misuse or devices,
especially in explosive areas. Therefore, please read the operating instructions carefully before
working on the product or operating it. The operating instructions must be accessible to
operating personnel at all times.
Please make sure that all documents are present and complete before commissioning or
performing other work on the product. If the documents have not all been delivered in full or if
further copies are necessary, they can also be obtained in other languages.
The product is built according to the latest state of the art. However, hazards to people,
machinery and systems can still arise as the result of improper handling, unintended use or
operation and maintenance by persons inadequately trained on the product.
All those who are involved in the installation, operation and maintenance of the product in the
operator's plant must read and understand the operating instructions.
The product may only be assembled, disassembled, installed and repaired by instructed,
sufficiently trained and authorised personnel.
2.2
Symbols used
3
Scope of this instruction manual
This instruction manual for the HE050-type vibration monitoring unit applies to all variants of the
HE050.
This symbol indicates a hazard from electrical current.
This symbol indicates safety-related information.
This symbol indicates information unrelated to safety.
4
Advertisement
Table of Contents
