Table of Contents
Advertisement
HAUBER-Elektronik GmbH
2
Safety information
2.1
General
The safety information is designed to protect people and property from damage and hazards
resulting from unintended use, incorrect operation or other negligent handling of devices,
especially in potentially explosive atmospheres. For this reason, you should read this instruction
manual carefully before undertaking any work on the product or commissioning it. The
instruction manual must be accessible to operating personnel at any time.
Please check that all documentation is in place prior to commissioning or other work on the
product. If not all documentation has been handed over in full, or if further copies are required,
then they can also be sourced in other languages.
The product has been constructed to the state of the art. Nevertheless, it is impossible to rule
out dangers emerging from this product which could endanger people, machines and systems,
should it be subject to inappropriate handling, non-intended use or use and maintenance by
insufficiently trained persons.
Every person employed by the operator and involved in the set-up, operation and maintenance
of this product must have read and understood this instruction manual.
The product may only be assembled, disassembled, installed and repaired by instructed,
sufficiently trained and authorised personnel.
2.2
Symbols used
3
Scope of this instruction manual
This instruction manual for the HE103-type vibration monitoring unit applies to the following
variants:
Standard / ATEX / IECEx / EACEx
The functionality of the versions is identical. The ATEX / IECEx / EACEx versions also possess
certifications and labels which permit use in potentially explosive atmospheres. For further
information, see chapter "Application areas and type plate examples" on page 6.
This symbol indicates a risk of explosion.
This symbol indicates a risk of electric shock.
This symbol points to non-safety-related information.
4
Advertisement
Table of Contents
