Table of Contents
Advertisement
RETAKE (2/3)
Button
Quick Review
FEATURE:
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Press 2 and release quickly during the Record–
Standby mode.
Tape is rewound for about 1 second and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
Retake
FEATURE:
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point
for new recording. Pressing 3 forwards the tape
and pressing 2 reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
17
EN
Hide quick links:
Advertisement
Table of Contents
