Recording; Basic Recording - JVC GR-FX11EG Instructions Manual

14
EN
EJECT Switch
Recording Start/Stop Button
Power lamp
Tally lamp
(lights while recording
is in progress)
Power Switch Position
According to the Power Switch position you have selected, the following functions are available:
AUTO
(Full Auto mode):
Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.
LENS COVER
Open/Close Ring
Power Switch
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.

RECORDING

NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power ( pg. 6)
Tape Length Setting (
Recording Mode Setting (
Grip Adjustment (
Viewfinder Adjustment (
1
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press the Close
button to ensure the holder is closed and locked.
2
ENTER RECORD-STANDBY MODE
Turn the LENS COVER Open/Close Ring to open the
lens cover, then set the Power Switch to "CAMERA"
("AUTO" or "PRO.").
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears on the
viewfinder screen, with the word "PAUSE"
superimposed upon it.
3
START SHOOTING
Press the Recording Start/Stop Button.
•" " appears in the viewfinder while recording is
in progress.
PRO.
(PRO. mode):

Basic Recording

pg. 10)
pg. 10)
pg. 12)
pg. 12)
OFF:
Allows you to switch off the
camcorder.