Manual White Balance Operation - JVC GR-DVM50 Instructions Manual

White paper
Lock Button
MENU/SET Dial
Display
FOCUS AUTO
EXPOSURE AUTO
4
W. BALANCE AUTO
FADER OFF
/ WIPE
P. AE OFF
/ EFFECT
TO MODE MENU 0
END
MANUAL
Power lamp
Power Switch
Recording Menu
Manual White
Balance Adjustment

Manual White Balance Operation

If the camera is operating in Manual mode "
Manual White Balance when shooting under various types
of lighting.
1
SELECT OPERATION MODE
Follow steps 1 through 5 of the white balance
adjustment ( pg. 40), and select "
2
SET MANUAL WHITE BALANCE
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that the
white paper fills the screen.
3
ENTER SETTING
Press MENU/SET until
•When the setting is completed,
4
EXIT MANUAL WHITE BALANCE
ADJUSTMENT
Press MENU/SET. The indication "W.BAL." changes
to "MANUAL" and only the Manual White Balance
indicator is displayed.
To Change The Tint For Recording . . .
.... in step 2, substitute colored paper for white. The white
balance is adjusted based on the color, changing the
tint. Red paper — deeper green; blue paper — orange;
yellow paper — deeper purple.
NOTES:
In step 2, it may be difficult to focus on the white paper
in some circumstances. In such a case, adjust focus
manually ( pg. 37).
A subject can be shot under various types of lighting
conditions indoors (natural, flourescent, candlelight,
etc.). Because the color temperature is different
depending on the light source, the tint of the subject will
differ depending on the white balance settings. Use this
function for a more natural result.
Once you adjust white balance during Manual White
Balance operation, the setting is retained even if the
power is turned off or the battery removed.
41
EN
", perform
MAN.".
begins blinking.
stops blinking.