Program Ae With Special Effects - JVC GR-DVM50 Instructions Manual

34
EN
A M
Operation Switch
MENU/SET Dial
Display
FOCUS AUTO
EXPOSURE AUTO
W. BALANCE AUTO
FADER OFF
/ WIPE
4 P. AE OFF
/ EFFECT
TO MODE MENU 0
END
P. AE / EFFECT
TWILIGHT
SEPIA
B/W MONOTONE
4
SEL. CLASSIC FILM
STROBE
1
SLOW 4X
2 SLOW 10X
PAUSE
The indicator for the selected mode appears, and the
selected mode is engaged.
RECORDING
Lock Button
Power lamp
Power Switch
Recording Menu
P.AE/EFFECT Menu
Advanced Features (cont.)

Program AE With Special Effects

IMPORTANT:
If certain Fades or Wipes (
modes of Program AE with special effects cannot be used.
If you select a mode that is unusable in the current
situation, the mode's symbol blinks.
You can choose any one of the effects from the P.AE/
EFFECT Menu.
1
SELECT OPERATION MODE
Set the Operation Switch to "
Switch to "
Button. Pull out the viewfinder fully or open the LCD
monitor fully.
2
ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS "P.AE/EFFECT" SELECT MENU
Rotate MENU/SET to move the highlight bar to "P.AE/
EFFECT", then press it.
4
SELECT MODE
Move the highlight bar to the desired mode by
rotating MENU/SET, then press it.
•The P.AE/EFFECT Menu disappears and the selected
mode is activated. The symbol of the selected mode
appears.
5
DISABLE MODE
To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to "OFF"
by rotating MENU/SET. Then press it.
NOTE:
Program AE with special effects can be changed during
recording or during Record-Standby.
pg. 33) are activated, some
". Then set the Power
" while pressing down the Lock