User Maintenance - JVC GR-DVM50 Instructions Manual

68
EN
Cassette holder
PUSH HERE
Remove.
Bottom of viewfinder
1
Gap
NOTES:
Avoid using strong cleaning agents such as benzine or alcohol.
Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth refer to the cautions of each product.
OPEN/EJECT Switch
BATT. RELEASE
Switch
Blower brush
2

USER MAINTENANCE

After Use
1
Turn off the camcorder.
2
Slide down OPEN/EJECT in the direction of the
arrow, then swing the cover open until it locks. The
cassette holder opens automatically. Remove the
cassette.
3
Press "PUSH HERE" to close the cassette cover.
4
Slide down BATT. RELEASE and remove the battery
pack.
Cleaning The Camcorder
1
CLEAN EXTERIOR
Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry
cloth.
2
CLEAN LCD MONITOR
Wipe gently with the provided cleaning cloth or a
commercially available soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
3
CLEAN LENS
Blow it with a blower brush, then wipe gently with
lens cleaning paper.
4
PULL OUT VIEWFINDER FULLY
5
CLEAN VIEWFINDER
Slide the cover in the direction of the arrow 1. Insert
a lens blower or a soft cloth into the gap at the
bottom of the viewfinder and clean the interior of the
viewfinder with it 2.
6
PUSH VIEWFINDER BACK IN
Close the cover until it locks in place. Tilt the
viewfinder horizontally, and push it back in.