Operation Mode - JVC GR-DVM50 Instructions Manual

To turn on the camcorder, first set the Power
Switch to any operation mode except "OFF",
then pull out the viewfinder fully or open the
LCD monitor. When setting the Power Switch,
press and hold the Lock Button.
Lock Button
A M
Operation Switch
According to the Operation Switch position
you have selected, "F.AUTO" or "MANUAL"
appears in the upper left corner.
F . AUTO
PAUSE
MANUAL
PAUSE
If the Power Switch is set to "
indications do not appear.
Power lamp
Power Switch
When set to " "
When set to " "
(When the Power
Switch is set to "5S",
"MANUAL" blinks.)
", these

Operation Mode

Turning the Power Switch and Operation Switch allows
you to choose the appropriate operation mode among the
following table:
Power Switch/
Operation
Switch Position
Suitable for standard recording.
5 second Allows you to record in 5-second
recording clips to keep the action moving.
mode: Enables shooting in Manual
5S mode. However, Focus and
Exposure are the same as in the
Full Auto mode, and it is not
possible to change menu settings
using the MENU/SET Dial.
Allows you to play back a
Playback:
recording.
Allows you to switch off the
OFF
camcorder. After setting to this
position, Manual Focus and
Exposure Control are automati-
cally reset to "AUTO".
Allows you to record using NO
Full Auto:
special effects or manual
adjustments. Suitable for standard
recording.
Allows you to set various
Manual:
recording functions using the
Menus. If you want more creative
capabilities than Full Auto
recording, try this mode.
15
EN
Function
pg. 42 – 49.